wide 2 : 1 and 4 : 1 input ranges high effciency regulated outputs 1600v isolation full emi shielding standard pinouts model number output voltage output amps input range st10-123.3s 3.3 vdc 2 9-18vdc st10-243.3s 2 18-36vdc st10-24f3.3s 2 10-40vdc st10-483.3s 2 36-75vdc st10-48f3.3s 2 18-75vdc st10-125s 5 vdc 2 9-18vdc st10-245s 2 18-36vdc st10-24f5s 2 10-40vdc st10-485s 2 36-75vdc st10-48f5s 2 18-75vdc st10-1212s 12 vdc 0.83 9-18vdc st10-2412s 0.83 18-36vdc st10-24f12s 0.83 10-40vdc st10-4812s 0.83 36-75vdc st10-48f12s 0.83 18-75vdc st10-1215s 15 vdc 0.67 9-18vdc st10-2415s 0.67 18-36vdc st10-24f15s 0.67 10-40vdc st10-4815s 0.67 36-75vdc st10-48f15s 0.67 18-75vdc ST10-1224S 24 vdc 0.42 9-18vdc st10-2424s 0.42 18-36vdc st10-4824s 0.42 36-75vdc unit measures 1w x 2l x 0.425h isolated and regulated 10 watt modular dc/dc converters st10 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage, nominal 12vdc, 24vdc, 48vdc input voltage ranges 9-18, 18-36, 36-75, 10-40 vdc input surge voltage 50v (12/24v models), * 100v (48v models), * 10 ms duration, min. input fusing 4a: 12/24vin models 2a: 48vin models input filter pi type output specifications voltage and current see selection chart max. output power 7 watts 3.3vdc o/p 10 watts all others voltage accuracy +/- 2% load regulation 10% - fl +/- 1% minimum load (3.3 & 5vout) 3% 0% all other outputs line regulation hl-ll +/- 0.5% temperature coeffcient +/-0.02%/c ripple <0.2% vout + 20mv (vp-p) max. noise <0.5% vout + 50mv (vp-p) max. overvoltage protection zener diode clamp * overcurrent protection 120% of rated, auto recovery short circuit protection current limit, self-recovering effciency 3.3 vout = 78% 5 vout = 81% 12 & 15 vout = 82% 24 vout = 83% physical specifications dimensions 2x1x0.425 case material nickel coated copper with non-conductive base connected to o/p ground 6 sided shielding construction fully encapsulated weight 1.13 oz, (32g) general specifications input-out isolation 1600vdc input-output resistance 10-9th ohms in/out capacitance 1000 pf switching frequency 300khz environmental specifications oper. temperature -25 to +70c(see derate) storage temperature -55 to +105c * maximum case temp 100c max. * humidity 95%rh * cooling free air convection mtbf >800,000 hrs @ 25c mil-hdbk-217f emi (conducted & radiated) en 55022 class a * these are stress ratings. exposure of the devices to any of these conditions may adversely affect long term reliability. proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. all specifcations are typical at nominal input, full load, and 25degc unless otherwise noted isolated and regulated 10 watt modular dc/dc converters st10 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
mechanical dimensions pin # function 1 + input 2 - input 3 + output 4 n/a 5 - output isolated and regulated 10 watt modular dc/dc converters st10 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
